Skip to content
MVP Interiors - Coulee Region flooring
Kitchen Countertops: Quartz, Granite, Laminate and Butcher Block Compared
Buying Guides · November 9, 2026 · 7 min read

Kitchen Countertops: Quartz, Granite, Laminate and Butcher Block Compared

Every countertop material is a trade between how it looks, how it handles heat, stains and knives, and how much looking after it needs. Knowing the trade before you pick a slab saves a lot of regret.

The countertop is the hardest-working surface in a kitchen. It takes hot pans, wet dishes, knives, spilled wine and lemon juice, and it is the first thing anyone touches when they walk in. It is also one of the largest material lines in a kitchen budget, which is why the choice deserves more than a look at a sample.

No material is best at everything. Each one is a different trade between appearance, durability and maintenance, and the right one depends on how the kitchen is actually used.

Quartz

Quartz countertops are engineered: crushed natural quartz bound with resin and pigments into slabs. Because the slab is made, the color and pattern are consistent, and what you see in the sample is close to what arrives. It is non-porous, so it does not need sealing and resists staining from coffee, wine and oil.

  • Strengths: consistent color, no sealing, very good stain resistance, a wide range of looks including convincing marble patterns.
  • Weak point: heat. The resin can scorch or discolor under a hot pan taken straight from the burner or oven, so trivets are part of living with quartz.
  • Not suited to outdoor kitchens or spots in strong direct sun, where some quartz can fade or yellow over time.

Granite and other natural stone

Granite is quarried stone cut into slabs, so no two are the same. It handles heat well and resists scratching. Most granite is somewhat porous and is sealed when installed and resealed periodically; how often depends on the stone, and a simple test is whether a few drops of water darken the surface after a few minutes.

Because every slab is different, natural stone is best chosen by seeing the actual slabs, not a small sample. The pattern in a showroom chip may be quite different from the slab that ends up on your island.

  • Marble is beautiful and stays cool, but it is softer and is etched by acids such as lemon juice, vinegar and tomato, leaving dull marks even when sealed. It suits people who like a surface that ages and shows its use.
  • Quartzite is a hard natural stone that can look like marble while being far tougher. Like granite, it is sealed. It is worth confirming with the supplier that a slab sold as quartzite is genuinely quartzite, because softer stones are sometimes sold under the name.
  • Soapstone is soft and scratches easily, but it is non-porous and heat-tolerant, and it darkens with mineral oil to a deep gray-black.

Laminate

Laminate is a printed decorative layer bonded to a particleboard core. It is the most economical countertop and has improved a long way, with stone and wood patterns and square edge profiles that look far less dated than the old rolled fronts.

  • Strengths: low cost, easy to clean, a wide range of colors, and quick to replace.
  • Weak points: it cannot be cut on, a hot pan can blister it, and a chip or burn cannot be repaired invisibly. Water that gets into the core at a seam or around the sink makes it swell, which is the usual way laminate fails.
  • Standard laminate is usually paired with a drop-in sink, because the cut edge of the core around an undermount sink is hard to protect from water.

Solid surface

Solid surface is an acrylic or polyester material that is the same all the way through. Seams can be joined almost invisibly, and a sink can be formed from the same material so the counter and sink are one piece with no rim to collect grime. Scratches and small burns can be sanded out. It is softer than stone and less heat-tolerant, so trivets and cutting boards are needed.

Butcher block

Wood counters are warm, quiet and kind to dropped glasses. They need the most care: oiled regularly, and kept dry, especially around a sink, where standing water darkens and eventually damages the wood. Scratches and knife marks can be sanded out and re-oiled. Many kitchens use butcher block on an island and a harder, water-tolerant material around the sink and range.

Thickness, edges and seams

Stone and quartz slabs commonly come in two thicknesses, roughly three-quarters of an inch and an inch and a quarter. The thicker slab is stiffer and can span further without support; the thinner one is sometimes built up at the front edge so it looks thicker.

The edge profile changes the look more than people expect. A square or slightly eased edge looks modern and clean; a bullnose or ogee looks more traditional. Rounder edges chip less and are kinder to hips in a busy kitchen.

Slabs come in limited sizes, so long runs and L-shaped counters usually need seams. A good fabricator plans where they fall, away from the sink and cooktop where possible and where the pattern can be matched, and it is worth asking to see the seam layout before cutting.

Overhangs and seating

An island or peninsula with stools needs a deeper overhang than the usual inch or so at the front of a counter, so knees fit underneath. How far a slab can extend past the cabinets without hidden steel supports or corbels depends on the material and thickness, and the fabricator specifies where supports are needed. That is a reason to settle seating early, since supports may need to be fixed to the cabinets before the counter is set.

Sinks, faucets and cooktops

  • An undermount sink is fastened under the counter, so crumbs wipe straight in. It needs a material with a finished, water-tolerant cut edge, such as stone, quartz or solid surface.
  • A drop-in sink sits on top with a rim, and suits laminate and tight budgets.
  • A farmhouse or apron-front sink needs a sink base cabinet made for it, so it is decided with the cabinets, not the counter.
  • The faucet decides how many holes are drilled and where. Soap dispensers, filtered water taps and air gaps each need their own hole.

All of these have to be chosen, and ideally on site, before the counter is templated, because the cutouts are made in the shop to the exact model.

Templating and the gap in the schedule

Stone, quartz and solid surface counters are not made from drawings. Once the cabinets are installed, level and fastened, the fabricator templates the real cabinets and walls, and the counter is cut to that template. Walls are rarely straight, and the template captures that. Fabrication then takes time, so there is usually a stretch of days or weeks between cabinets going in and counters arriving. Some households set up a temporary counter on the base cabinets to get through it.

Where the counter sits in the full kitchen sequence, including the floor, is covered in kitchen remodel flooring: under the cabinets or around them?

The backsplash comes after

The backsplash tile sits on the finished counter and is laid out from it, so it goes in after the counters are installed. If you are choosing both, it helps to pick the counter first and bring a sample of it when choosing tile. Planning the tile itself is covered in kitchen backsplash tile.

Keeping the cabinets

New counters on existing cabinets are a common update when the boxes are sound. Stone and quartz are heavy, so the cabinets have to be level, solid and well fastened to carry them, and a stone counter is not set on cabinets that are already sagging. If the cabinets are staying but the color is not, painting them is covered in painting kitchen cabinets.

Planning a kitchen

Cabinetry and countertops are part of our room remodels, alongside the tile, flooring, trim and paint, with plumbing and electrical carried out by licensed trades we bring in. One written fixed-price scope covers the whole room, and every project carries our lifetime workmanship warranty. Book a free in-home estimate and we will talk through how you use the kitchen before anyone picks a slab.

Published November 9, 2026 by MVP Interiors · Onalaska, WI · (608) 304-3038
Common questions

Your questions, answered

Is quartz or granite better for a kitchen countertop?

+

It depends on what matters most. Quartz is non-porous, needs no sealing and has a consistent look, but its resin can be damaged by a hot pan. Granite handles heat well and every slab is unique, but most granite needs sealing periodically. Both are durable choices for a busy kitchen.

Can you put a hot pan on a quartz countertop?

+

It is best not to. The resin that binds quartz can scorch or discolor under a pan taken straight from the burner or oven. Trivets and hot pads are part of living with quartz.

Does granite need to be sealed?

+

Most granite is somewhat porous and is sealed at installation and resealed periodically. How often depends on the stone. If a few drops of water darken the surface after a few minutes, it is time to reseal.

Can you have an undermount sink with laminate countertops?

+

Standard laminate is usually paired with a drop-in sink, because the exposed core around an undermount sink is hard to protect from water and swells if it gets wet. Undermount sinks suit stone, quartz and solid surface.

Why is there a wait between cabinets and countertops?

+

Stone, quartz and solid surface counters are templated from the installed cabinets and the real walls, not from drawings, and then cut and finished in the shop. The cabinets have to be in, level and fastened before the template can be made.

Can I keep my cabinets and just replace the countertops?

+

Often, if the cabinet boxes are sound, level and well fastened. Stone and quartz are heavy, so cabinets that are sagging or loose are repaired or replaced first. The sink, faucet and cooktop are chosen before templating so the cutouts are right.

Financing

12-month same-as-cash and 84-month fixed-rate plans available.

Most decisions return in minutes. We work with GreenSky and Synchrony so you can lock the project, then choose terms that fit your budget.

More from the blog
Get started

Ready to turn a guide into a real quote?

Free in-home flooring estimate anywhere in the Coulee Region - samples, a measured drawing, and a fixed price with no high-pressure pitch.

Email Free Estimate